+
  • 都是提升机.gif
  • 29(1761641035601).png

TB type bucket elevator(TB型斗式提升机)

Category:

hiddenValue

Details Introduction

Overview/概述

The TB type vertical bucket elevator is widely used in mining, metallurgy, building materials, coal, hydropower and other departments to vertically lift block, granular, and powdery materials with no limit on bulk density and temperature not exceeding 250 ℃, such as mines, coal, coke, cement, gravel, etc. It is a new type of energy-saving and efficient lifting equipment.
The TB bucket elevator adopts a plate sleeve roller chain as the traction component, which is a transitional product of the NE plate chain bucket elevator. Using gravity based unloading method, it is suitable for medium and large block shaped abrasive materials with bulk density < 2t/m³. The temperature of the conveyed material shall not exceed 250 ℃. The lifting height of the TB bucket elevator ranges from 5m to 50m, and the conveying capacity ranges from 20 to 560m³/h.
The TB bucket elevator is a lifting equipment with plate chain transmission and gravity induced unloading. The machine adopts an inflow feeding method, where the material flows into the hopper and is lifted to the top by a plate chain, and is automatically discharged under the gravity of the material itself. The chain is a high-quality alloy steel high-strength plate chain, which is wear-resistant, durable and reliable in operation; the driving part adopts a hard tooth surface reducer.

 

Technical Specifications

Model

Maximum feeding particle size mm

Bucket distance mm

Width mm

Capacity L

Maximum lifting capacity (m³/h)

TB250

90

200

250

3

29

TB315

100

200

315

6

72

TB400

110

250

400

12

121

TB500

130

320

500

25

191

TB630

150

400

630

50

294

 

Structural Characteristics

1. The range of improvement is wide, which can not only improve general powder, granular, and block materials, but also improve materials with high grindability. 
2. Low driving power, low energy consumption, and energy-saving. The energy consumption for lifting materials of the same height is about 1/3 to 1/2 of that of a circular chain hoist.    
3. The whole machine adopts a fully sealed design, and there is no dust pollution during operation.   
4. The casing adopts a ribbed structure, with good rigidity, high precision, and beautiful appearance. 

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!