RCDD Dry self dumping electromagnetic iron remover（RCDD干式自卸式电磁除铁器）
hiddenValue
Details Introduction
The RCDD series dry self dumping electromagnetic iron remover is an electromagnetic equipment used to remove iron parts from scattered non-magnetic materials. It is generally installed at the head or middle of a belt conveyor. The strong magnetic force generated by electricity will suck up the iron parts mixed in the material and throw them out by the iron unloading belt, achieving the purpose of automatic removal. It can effectively prevent the longitudinal scratching of the conveyor belt and protect the normal operation of crushers, grinders, etc. Therefore, this series of iron removers is widely used in departments such as power, mining, metallurgy, building materials, coal preparation, chemical industry, etc.
RCDD 系列干式自卸式电磁除铁器，是一款用于清除散状非磁性物料中铁件的电磁设备。该设备通常安装于皮带输送机的头部或中部位置，通电后产生强磁力，可吸起混杂在物料中的铁件，并通过卸铁皮带将铁件抛出，实现自动除铁的目的。它能有效防止输送带被纵向划伤，同时保障破碎机、研磨机等设备的正常运行。因此，本系列除铁器广泛应用于电力、矿山、冶金、建材、选煤、化工等行业领域。
Product Model And Its Meaning
Terms Of Use
1. The altitude shall not exceed 2000 meters.
设备使用海拔高度不得超过 2000 米。
2. The ambient air temperature shall not exceed+40 ℃ and shall not be lower than -20 ℃.
环境空气温度不得高于 40℃，且不得低于 - 20℃。
3. In an environment without explosion hazards and corrosive gases.
需在无爆炸危险、无腐蚀性气体的环境中使用。
4. The relative humidity of the surrounding environment shall not exceed 90% (at a temperature of 25 ℃).
周围环境相对湿度不得超过 90%（温度为 25℃时）
5. It can be used both indoors and outdoors.
室内外均可使用。
Structural Characteristics
The RCDD series dry self dumping electromagnetic iron remover consists of two parts: the body and the iron unloading mechanism.
RCDD 系列干式自卸式电磁除铁器由机身和卸铁机构两部分组成。
The magnetic circuit design of the body is reasonable, with high magnetic field strength and deep magnetic penetration, suitable for removing iron from thick material layers. The manufacturing process adopts a fully sealed structure and vacuum drying technology, which can prevent dust and harmful gases from corroding the coil. It has strong environmental and climate adaptability and a long service life.
机身磁路设计合理，磁场强度高、磁透深度大，适用于厚料层除铁作业。制造工艺采用全密封结构与真空干燥技术，可防止粉尘及有害气体对线圈造成腐蚀，环境气候适应性强，使用寿命长。
Characteristics of iron unloading mechanism
卸铁机构特点
The iron unloading mechanism includes a frame, a reduction motor (cycloidal pinwheel reducer), main and driven pulleys, rollers, sprockets, chains, and scrap iron belts with scrapers. The tension and deviation adjustment of its iron belt can be completed without stopping the machine through the bearing adjustment device.
Its structure is shown in Figure 1.
卸铁机构包含机架、减速电机（摆线针轮减速器）、主从动带轮、托辊、链轮、链条以及带刮板的卸铁皮带。其卸铁皮带的张紧与跑偏调整，可通过轴承调节装置在不停机状态下完成。具体结构见图 1。
Main Parameters And External Dimensions
Model | Adaptive Bandwidth mm | Adaptive bandwidth mm | Magnetic Field Strength ≥ MT | Material Thickness ≤ mm | Excitation Power ≤ KW | Drive Power ≤ KW | Adapt To Belt Speed ≤ m/s | Weight Kg | Dimensions mm | ||||
A | B | C | D | E | |||||||||
RCDD-5 | 500 | 150 | 60 | 100 | 1 | 1.5 | 2.5 | 950 | 2020 | 1040 | 775 | 853 | 1000 |
RCDD-6 | 600 | 175 | 60 | 130 | 1.8 | 1.5 | 1380 | 2140 | 1100 | 800 | 910 | 1100 | |
RCDD-6.5 | 650 | 200 | 70 | 150 | 2 | 2.2 | 1490 | 2275 | 1190 | 820 | 988 | 1250 | |
RCDD-8 | 800 | 250 | 70 | 200 | 3 | 2.2 | 1770 | 2540 | 1480 | 865 | 1287 | 1350 | |
RCDD-10 | 1000 | 300 | 70 | 250 | 4.5 | 3 | 2380 | 2750 | 1635 | 940 | 1420 | 1400 | |
RCDD-12 | 1200 | 350 | 70 | 300 | 5.8 | 3170 | 3000 | 1800 | 1010 | 1580 | 1700 | ||
RCDD-14 | 1400 | 400 | 70 | 350 | 6.7 | 4 | 4800 | 3500 | 2050 | 1050 | 1800 | 2000 | |
RCDD-16 | 1600 | 450 | 70 | 400 | 9.5 | 5.5 | 6300 | 3900 | 2450 | 1180 | 2200 | 2350 | |
RCDD-18 | 1800 | 500 | 70 | 400 | 12.5 | 7.5 | 7800 | 4400 | 2850 | 1290 | 2600 | 2800 | |
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!
Related Products
Industrial Magnetism Solutions Pioneer
Contact Us
No. 1256 Dongwu Road, Dongcheng Development Zone, Linqu County, Weifang City, Shandong Province China