+
  • 45.jpg
  • 17617177386779620177.gif
  • 44.jpg
  • 43.jpg
  • 40.jpg
  • 42.jpg
  • 38.jpg
  • 37.jpg
  • 41.jpg
  • 36.jpg
  • 39.jpg

RCYB permanent magnet plate iron remover(RCYB永磁除铁器)

hiddenValue

Details Introduction

RCYB Series Permanent Magnetic Separator Plates

RCYB series permanent magnetic separator plates use high-coercivity, high-remanence permanent magnets and a special magnetic system. Compared with non-power-excited electromagnetic separators, they offer significant energy savings, no control circuits (reliable and trouble-free), small size, easy installation, and require no maintenance.
RCYB 系列永磁除铁器

RCYB 系列永磁除铁器采用高矫顽力、高剩磁永磁体及特殊磁系设计。相较于无励磁电磁分离器,具有显著节能优势,无需控制电路(运行可靠、无故障)、体积小巧、安装简便且免维护。

 

Performance & Standards
They adopt advanced computer-aided internal magnetic circuit design. The permanent magnetic core has a decay rate of less than 3% in 8 years and a service life of up to 25 years.
性能与标准

采用先进的计算机辅助内部磁路设计,永磁磁芯 8 年衰减率低于 3%,使用寿命长达 25 年。

 

Application Scenarios
They are used with conveying equipment such as belt conveyors, vibrating conveyors, electromagnetic vibrating feeders, and discharge chutes to remove 0.1-25kg ferromagnetic inclusions from bulk materials.
应用场景

与带式输送机、振动输送机、电磁振动给料机、卸料溜槽等输送设备配套使用,用于去除散状物料中 0.1-25 公斤的铁磁性杂质。

 


The Structure and Working Principle
Figure shows the structure, permanent magnetic separator source using high-performance ferrite and neodymium iron boron magnetic material composition of complex magnetic system, which generates a magnetic field strength, field depth, life is long, uniform magnetic group In the face plane magnetic system formed. 
Permanent magnet suspended from the conveyor belt at one end (see installation diagram), when the ferromagnetic material through the bottom of the permanent magnet, the magnetic materials (iron debris) adsorbed on the solid iron magnet, rather than the magnetic material to fall position in the work required to achieve the purpose of iron removal.

结构与工作原理

如图所示为设备结构,永磁分离器采用高性能铁氧体与钕铁硼磁性材料组成的复合磁系,所产生的磁场强度高、磁场深度大、使用寿命长,并在工作表面形成均匀磁场。

将永磁体悬挂于输送带一端上方(详见安装示意图),当铁磁性物料经过永磁体底部时,磁性物质(铁屑等)被吸附在磁体的吸铁面上,非磁性物料则落在所需工作位置,从而达到除铁目的。
 

The Names and Specifications


 

Appearance and Installation Diagram

 

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!